I believe used automatic feeding system manufacturers know that the automatic feeding system works vacuum tube is turned off, start the motor, with a low vacuum air flow plastic resin particles into the vacuum tube, the motor stalls, and then the particles into the hopper, So cycle operation. We are in the design of the control system, the motor can be used to control two feeding production line, the directional valve switch. The two lines can be run individually or simultaneously, allowing for the efficiency of the control system and the motor, thus allowing automatic feeding.
The role of automatic feeding system are:
A: Automatic Feeding System The system solves the problem of non-common use of a varnish and a transparent material. The workers only need to pour the raw material, the recycled material and the masterbatch into the blender in proportion and then mix it into the dry muscle Drying operation. Because it is the use of a machine double pipe, the advantage is that a machine can use variegated material can also be used transparent material, feed to ease the use of dryer and mixer mode, to achieve centralized processing of raw materials, closed delivery, to avoid shop noise, Dust, hot air pollution phenomenon.
Second: In the production line of the transmission of raw materials, the injection molding machine can be used in three-stop weighing machine, a main raw material, a station Masterbatch, a station of renewable materials, raw materials through the automatic feeding system-type delivery, Recycled material through the central feed fan control, injection molding machine placed next to the storage tank with a proportional valve automatically add mixing, masterbatch placed in the injection molding machine next to the storage tank using energy-saving environmental protection positive pressure automatically added, thus achieving automatic Supply, automatic ingredients, feeding purposes.
Three: Automatic Feeding System Engineering Raw materials are pumped from the warehouse to the drying room, and then from the drying room to the injection molding machine, flexible use of local conditions, to solve the dry room space is not enough, the project to achieve long-distance (350 meters) 230 meters long section of the transmission, can be a good solution to the duplication of raw materials, the high cost of manual handling and inadvertent resulting incomplete drying problems, not to mix other raw materials are not allowed, the most important is to reduce procurement , Power consumption. Maintenance costs, improve product quality, improve work efficiency.
The above is about the role of automatic feeding system to share, automatic feeding system because of its wide range of functions and has been widely used in feeding operations.